Lift removal and installation
Duration: 4 months
This project included the removal of the existing 4 lifts and replaced it with an OTIS Gen2 lift. We also had to complete alterations to the marble work and the installation of new stainless steel architraves. All works were carried out in out-of-hours so as to limit disruption to the offices.
Working for Balfour Beatty Mott Mcdonald, we were contracted in to design, fabricate and install the lighting of external walkways to the outside of the bridge.
Duration: 6 weeks
Lift removal and modernisation works of a 7 stop duplex pair of lifts.
Lift removal/installation, construction
Duration: 14 weeks
CBES lift engineering department removed and installed a lift shaft in a historic grade 1 listed building. This was a complicated and delicate project, as we had to ensure the old timbers finishers were retained. Also the new timbers had to be in keeping with the character of the building. Fire proofing was also carried out to comply with safety regulations. This project had to be extremely well planned, as it had to be completed successfully on a tight timescale.
Duration: 4 Weeks
This project involved the removal and reinstallment of a duplex hydraulic pair of lifts to enable Willmot Dixon to build a new plant room. The work for North Somerset council was undertaken in partnership with Bailey Elevators.
Serco, Ministry Of Defence, Wiltshire
Building & Electrical Refurbishment
CBES are at present refurbishing and wiring the existing buildings and offices for the provision of a new computer suite and associated services for the satellite communications industry.